Komatsu 95-2 DIESEL ENGINE — 5. INJECTION NOZZLE

DISASSEMBLY AND ASSEMBLY DISASSEMBLY 2. Starting motor, engine stop solenoid, fuel and oil filter, dipstick 1) Remove bracket (1), then remove dipstick (2). 2) Remove engine stop solenoid (3). 3) Remove starting motor (4). 4) Disconnect fuel hoses (5) and remove fuel filter assembly (6) from intake manifold. 5) Remove oil filter (7) from engine block to- gether with tube. 3. Water pump 1) Remove 4 mounting bolts (1) and adjust- ment plate (2). 2) Pull out pilot portion and remove water pump assembly (3). 4. Fuel injection pipe, glow plug 1) Remove 4 boots (1) and disconnect sleeve nut from injector. fl Disconnect the injection pump end in the same way.

2) Remove 2 bracket mounting bolts (2), then remove fuel injection pipe (3) together with bracket. 3) Remove 3 nuts of glow plug, then remove 3 each of wiring connector (4), lead (5), and plug (6). 5. Injection nozzle 1) Remove spill hoses (1). 2) Remove 4 nozzle holders (2), then remove 4 injection nozzles (3) from cylinder head. 95-2 SERIES 13-5 13-5 1