Komatsu 95-2 DIESEL ENGINE — 14. FUEL INJECTION PUMP

DISASSEMBLY AND ASSEMBLY OVERALL ASSEMBLY 14. Fuel injection pump Set head side of cylinder block facing up. Fit O-ring (2) to holder (I), align counter mark C-C of drive gear (4) and idler gear (31, then insert in gear case together with fuel injec- tion pump assembly (5). Secure holder (1) to gear case with bolt (6). Remove bolt (7), and secure drive gear (4) with other bolts. Sr Prepare a bolt with the same diameter and pitch as bolt (7). Remove bolt (7), insert the bolt through the hole, and screw the bolt into the drive gear bolt hole. When doing this, check that the counter marks are aligned. Fit cover (8) and tighten with mounting bolts (9).

Tighten mounting nut (IO) of fuel injection pump assembly (5) and holder (I). Sr Mark the holder and fuel injection pump, Remove the bolt holding the drive gear, then install bolt (7). Install oil supply tube (11) and bracket (12). and the holder and gear case. 95-2 SERIES 1 3-23