MAINTENANCE STANDARD OIL PUMP OIL PUMP SWEOlZ77 Unit:
m m - Standard 1 Tolerance , 1 Standard 1 Clearance No - Check item Criteria Remedy size Gear width Body depth (End play) (End Dlav) clearance limit 1 Axial clearance of pump gear 0 -0.070 0.030 - l2 I -0.015 I +0.030 I 0.085 I __ Replace gear Radial clearance of pump gear 2 +0.115 38 +0.065 I +0.205 I 0.090 0.13 +0.245 0.045 - - Standard Tolerance Standard Clearance o clearance or interferencc size Shaft I ole interference limit I -0.024 -0.065 0.025 - l3 I -0.042 I -0.086 1 0.061 I - Interference between pump drive gear and drive shaft 3 Replace Clearance between drive shaft and cover 13 -0.024 +0.018 0.024 - -0.042 0 0.060 - Replace bushing 4 5 Interference between pump gear and drive shaft 13 -0.024 -0.065 0.025 - -0.042 -0.086 0.061 - Replace Clearance between drive shaft and bushing 13 -0.024 +0.048 0.028 - -0.042 +0.004 0.09 - Replace bushing 6 - 7 - Clearance between driven shaft and cylinder block -0.064 +0.046 0.060 Replace cylinder block 8 - Clearance between driven shaft and gear -0.1 10 -0.125 -0.086 0.060 Replace shaft or gear Clearance between drive shaft bushing hole and cylinder block -0.087 +0.018 0.042 - I +0.060 0 1 0.087 I - Replace cylinder block 9 - 95-2 SERIES 14-1 3