Komatsu 95-2 DIESEL ENGINE — ADJUSTING VALVLE CLEARANCE

TESTING AND ADJUSTING ADJUSTING VALVE CLEARANCE ADJUSTING VALVE CLEARANCE 1. Remove cylinder head cover. 2. Rotate the crankshaft in the normal direction. While watching the movement of the intake valve of No. 4 cylinder, bring the No. 1 cylinder into Compression Top Dead Center position and align the TOP engraved mark on crankshaft pulley (5) with pointer (6). fl When the No. 1 cylinder comes near Com- pression Top Dead Center position, the No. 4 intake valve will start to move (open). 3. Adjust the valve clearance for valves marked ‡ in the valve arrangement chart. 4.

Rotate the crankshaft in the normal direction by one revolution and adjust the valve clearance for the remaining valves marked . fl To adjust the valve clearance, loosen lock nut (8) on adjustment screw (7), insert feeler gauge A corresponding to the specified clear- ance between valve stem (6) and rocker arm (5), and adjust the clearance with the adjust- ment screw until the thickness gauge can slide lightly. 5. After the clearance is properly adjusted, tighten the lock nut to secure the adjustment screw. 3 Lock nut: 44 ± 5.0 Nm {4.5 ± 0.5 kgm} 12-2 95-2 SERIES