TROUBLESHOOTING METHOD OF USING TROUBLESHOOTING CHARTS The basic method of using the troubleshooting chart is as follows. Items listed for [Questions] and [Check items] that have a relationship with the Cause items are marked with 0, and of these, causes that have a high prob- ability are marked with 8. Check each of the [Questions] and [Check itemsl in turn, and marked the 0 or 8 in the chart for items where the problem appeared. The vertical column (Causes) that has the highest number of points is the most probable cause, so start troubleshooting %I.
For [Confirm recent repair history] in the [Questions] Section, ask the user, and mark the Cause column with to use as reference for locating the cause of the failure. How- ever, do not use this when making calcula- tions to narrow down the causes. %2. Use the a in the Cause column as reference for [Degree of use (Operated for long pe- riod)] in the [Questions] section as reference. As a rule, do not use it when calculating the points for locating the cause, but it can be included if necessary to determine the order for troubleshooting. 95-2 SERIES 12-1 03