4. Engine Body (3) Reassembly procedure: Reverse order of the disassembly procedure. 98N(lO kgf) (4) Servicing points Point 1 Disassemble: l Loosen the mounting bolt while sup- porting the alternator. Crankshaft pulley V-belt tension Do not tilt the alternator toward the cylinder block in a haste since it a finger. may damage the alternator or pinch Adjust th le V-belt tension ing a bar. -7 &5- Reassemble: . The belt deflection shall be lo-15 mm (7 - 9 mm for a new belt). Adjuster \\YE& Reassemble: l Replace the belt with a new one if cracked, worn or damaged. l Carefully prevent the belt from being smeared with oil or grease. Alter&or Tension Adjustment Point 2 Reassemble:
l Check the thermostat function. (See 3.9 in Chapter 3 for the check procedure.) Point 3 Reassemble: l Replace the fuel filter element with a new one. Disassemble: l Cover the fuel pipe opening with tape to prevent intrusion of foreign matters. Point 4 Reassemble: l Replace the oil filter with a new one. l After fully tightening the filter manually, retighten it with a filter wrench (see 11.1-6 in Chapter 11) by 3/4 turn. Point 5 Disassemble: l Cover the fuel injection pipe and pump inlets and outlets with tape or the like to prevent intrusion of foreign matters. 4-3