Komatsu — (3) Disassembly procedure:

7. Fuel Injection System/Governor (2) Components r- Delivery valve spring holder - C&LC=l f St n Dellvely vake Plunger 8 barrel- _ 1 Pumphousi? 1 Pinion- 53 e Control sleeve -I.& Plunger spring upper retainer .8 Plunger spring 3 & Plunger spdng lower retainer -c$J Note) This illustration is the standard com- ponents for the PES-A type. ?he shapes of some park are differ- ent from those of the fuel injection I- pump for this engine. (3) Disassembly procedure: (3.1) Disassembly from the engine body @ Remove the cooling fan, pulley and V-belt. See 4.2(2)@ in Chapter 4. @ Remove the fuel injection pipe, fuel oil piping, fuel return pipe and rear stay. See 4.2(2)0 in Chapter 4.

@ Remove the fuel injection pump drive gear cover. See 4.3(l) in Chapter 4. @ Remove the fuel injection pump drive gear. See 4.3(l) in Chapter 4. (Point 7) @ Remove the fuel injection pump. See 4.3(2)@ in Chapter 4. (3.2) Fuel injection pump disassembly @ Remove the fuel feed pump. See 7.4(l) Components. @ Remove the governor cover. See 7.5(l) Components. (Point 2) @ Remove the governor housing. See 7.5(l) Components. (Point 3) @ Remove the bottom screw from the bottom. (Point 4) @ Remove the fuel injection pump cover. @ Bring the tappet away from the camshaft. (Point 5) 0 Remove the bearing holder. (Point 6) @ Remove the camshaft. (Point 7) 7-2