Komatsu — (6) Parts inspection and measurement

7. Fuel Injection System/Governor (6.4) Delivery valve sion and wear mainly at the piston. Mainly check for surface defect, corro- (6.5) Check mainly the control rack for bend, the pinion for wear and dam- Rack, pinion and sleeve sleeve for wear at the contact face age at the gear portion, and the with the plunger collar portion. (6.6) Tappet Check mainly for wear and damage at the pin hole, roller, pin and bushing. Tappet (6.7) Camshaft Check mainly the cam surface for dam- age and wear, the key groove and thread for deformation, and the shaft for bend. (6.8) Bearing 1 Check mainly the roller bearing for wear, and the outer race for surface de- fect.

Camshaft (6.9) Plunger spring lower retainer Check mainly the portion in contact with the plunger for deformation and wear. 4% Plunger spring lower retainer 7-6