TROUBLESHOOTING TROUBLESHOOTING In addition to operating the engine carefully and maintaining it properly, make sure to correct any malfunction promptly. Emergency Starting For emergency starting procedures (jump starting), see the driver's manual under the heading "Emergency Starting With Jumper Cables." Troubleshooting the Electronic Engine Control System When the electronic engine control system detects a fault, it broadcasts a message on the datalink. The dash display will show the code "ECU 128," indicating there is an engine fault. Important: To read the complete fault code, bring the vehicle to an authorized dealer.
Complete fault codes can be read using minidiag2, the Nexiq DDR or DDDL PC software. For fault codes and their meanings, see the next section in this guide. 34 All information subject to change without notice. (Rev. 04/08) DDC-SVC-MAN-0056 04/08 Copyright © 2008 DETROIT DIESEL CORPORATION