Komatsu · 316 pp.

UEAD001500 PC340LC-7K & PC340NLC-7K HYDRAULIC EXCAVATOR

Related manuals

Contents

Document text

COVER

Operation & Maintenance Manual UEAM001500 PC340LC -7K PC340NLC -7K HYDRAULIC EXCAVATOR SERIAL NUMBER PC340LC-7K - K40001 and up PC340NLC-7K - K40001 and up Unsafe use of this machine may cause serious injury or death. Operators and maintenance personnel must read this manual before operating or maintaining this machine. This manual should be kept inside the cab for reference and periodically reviewed by all personel who will come into contact with the machine. WARNING

Page 1

FOREWORD

FOREWORD FOREWORD FOREWORD This manual provides rules and guidelines which will help you use this machine safely and effectively. The precau- tions in this manual must be followed at all times while operating or performing maintenance . Most accidents are caused by the failure to follow fundamental safety rules for the operation and maintenance of machines. Accidents can be prevented by knowing beforehand conditions that may cause a hazard when performing operation and maintenance. Operators and maintenance personnel must always do as follows before beginning operation or mainte- nance.

G Always be sure to read and understand this manual thoroughly before performing operation and maintenance. G Read the safety messages given in this manual and the safety labels affixed to the machine thor- oughly and be sure that you understand them fully. Keep this manual in the storage location for the Operation and Maintenance Manual given below, and have all personnel read it periodically. If this manual has been lost or has become dirty and cannot be read, request a replacement manual immediately from Komatsu or your Komatsu distributor. If you sell the machine, be sure to give this manual to the new owners together with the machine.

Komatsu delivers machines that comply with all applicable regulations and standards of the country to which it has been shipped. If this machine has been purchased in another country or purchased from someone in another country, it may lack certain safety devices and specifications that are necessary for use in your country. If there is any question about whether your product complies with the applicable standards and regulations of your country, consult Komatsu or your Komatsu distributor before operat- ing the machine. Storage location for the Operation and Maintenance Manual: Storage box on the left side of the operator's seat. 2 WARNING

Page 4

SAFETY INFORMATION

FOREWORD SAFETY INFORMATION SAFETY INFORMATION To enable you to use this machine safely, safety precautions and labels are given in this manual and affixed to the machine to give explanations of situations involving potential hazards and of the methods of avoiding such situa- tions. Signal words The following signal words are used to inform you that there is a potentially hazardous situation that may lead to personal injury or damage. In this manual and on machine labels, the following signal words are used to express the potential level of hazard. Indicates an imminently hazardous situation which, if not avoided, will result in death or seri- ous injury.

This signal word is to be limited to most extreme situations. DANGER WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or mod- erate injury. It may also be used to alert against unsafe practices. Example of safety message using signal word To avoid hitting unlocked operation levers, lower equipment to ground and move SAFETY LOCK LEVER (located near seat) to LOCK position before getting up from the operator's seat. Sudden and unwanted machine movement can cause serious injury or death.

Other signal words In addition to the above, the following signal words are used to indicate precautions that should be followed to pro- tect the machine or to give information that is useful to know. NOTICE This word is used for precautions that must be taken to avoid actions which could shorten the life of the machine. REMARK This gives information that is useful to know. 3 WARNING

Page 5