. OPERATION EXPLANATION OF COMPONENTS REVERSING TAPE When listening to the tape, press both FAST FORWARD, PRECAUTIONS WHEN USING WARNING and ask your 3 - 58 REWIND buttons (A) and (B When this is done, the tape direction display will be reverse If a voltage greater than the s pecified voltage is input, it may caus e fire, ele ctrocution, or o ther failure. Never inpu other than the specified volt age. nder high voltage. Do not remove the cover. ations. This may cause fire, electrocution, or other failure. d, nothing is displayed, or any other problem occurs, turn off the power switch repairs without delay. Places inside the radio are u nder high voltage. Do not remove th e cover.
Do not carry out any modific ations. This may cause fire, electrocution, o If the sound cannot be hear Komatsu distributor to make Stow the antenna when tr aveling in places with low overhead cle arance. To ensure safety during o perations, keep the volume at a level w here it is poss ible to hear other ma If water gets inside the sp eaker case or radio (auto tuning ), it ma y cause a seri ous problem, take ca water get in these items. Do not wipe the scales or buttons with benzene, thinner, o r any ot her solvent. Wipe with a soft dry c cloth soaked in alcohol if the equipment is extremely dirty . NOTICE Handling cassette tape once a month with a commercially available head cleaning tape.
Clean the tape head approx. once a month with a commercially a vailable head cleaning t Do not leave the tape any pla ce where it is exposed to direct sunlight, any place that is e xcessively dusty, or any there is a magnetic field. . The tape is thin and it easily gets caught up inside the machine. Do not use 120-minute tapes . The tape is thin and it easily gets caught u p inside the ma If the tape is slack, it easily g ets caught up inside the machine. Use a pe ncil to wind in t he tape to remove any s Do not use any cassette tape if the label has started to come off. I t may ca use defective ro tation, or it may be imp the tape out of the machine.