Komatsu — OPERATIONS AND CHECKS AFTER STARTING ENGINE

. OPERATION OPERATION OPERATIONS AND CHECKS AFTER STARTING ENGINE WARNING Emergency stop procedures. Particularly in cold areas, make sure to warm up the machine properly. BREAKING-IN THE MACHINE CAUTION 3 - 82 other trouble occurs, turn the key in the starting switch to the O If the work equipment is operated without warming up the machine sufficiently, the response of th e work equipment t o the be slow. The work equipment may not move as the operator de sires. Follow all warm-up NOTICE When the hydraulic oil temperature is low, do not operate under heavy load or at high speed. There is d anger that the pump may break.

Your Komatsu machine has been thoro ughly adjusted and tested before shipment. However, operating t he machine under s evere conditions at the beginning can adver sely affect the performance and shorten the machine life. e initial 100 hours (as indicated by the service meter). precautions described in this manual. Be sure to break-in the machine for th During break-in operations, follow the Idle the engine for 5 minutes af ter starting it up. ds or at high speeds. Avoid operation with heavy loa Immediately after starting the e ngine, avoid sudden starts, sudden acceleration, unnecess ary sudden stops , and sudden changes in direction.

NORMAL OPERATION After starting the engine, do not i mmediately start operations. First, perform the following o perations and checks. NOTICE Do not suddenly accelerate the engine completed. Do not run the engine at low idle or hig minutes. If it is necessary to run the engine at id run the engine at a mid-range speed.