. OPERATION OPERATION HANDLING HYDRAULIC QUICK COUPLER WARNING REMOVING THE ATTACHMENT 3 - 94 Before operating the machine, check that t he attachment is correctl y connected. If it is not corre ctly installed, t he attachmen t may fall off and cause serious injury. C heck t hat the quick coupler attachme nt switch is at th e CONNECT position. C heck t hat the coupler plunger is completely inserted into t he a ttachment. 1. Til t th e attachment 2. Keep the control lever at the TILT position, pull lock (A) of the quick coupler attachmen t in the directio the arrow (c) , a nd push position the connection. 3. Chec k that the coupler plunger is completely pu lled