Komatsu — WORK POSSIBLE USING WHEEL LOADER

. OPERATION OPERATION LEVELING OPERATIONS carrying out leveling PUSHING OPERATION CAUTION LOAD AND CARRY OPERATIONS WARNING the center of gravity is raised, the turned ON, the work is actuated, the 3 - 100 NOTICE Always operat e the machine in reverse when operations. If it is necessar do not set the y to carry out leveling operations w bucket-dump angle to more than 2 Turn the E.C.S .S. switch (if equipped) OFF when operations. 1. Scoop soil in to the bucket. Move the mach ine backward while . spreading s oil from the bucket little by little 2. Go over the spread soil with the bucket tee th touching the ground and level the ground 3.

Scoop some more soil into the bucket, put t he lift arm control lever in FLOAT position, lev level, and s mooth the ground by moving b ackward. Never set the buc ket to the DUMP position when car When carrying o ut pushing operations, set the bottom of the bucket parallel to the ground s When carrying a load, lower the bucket to lower when traveling. hine is traveling or the work equ When the mac moment that th e E.C.S.S. switch (if equipped) is equipment will move. If operations ar the ON positio e carried out with the E.C.S.S. swit n, the moment that the travel da t will move.

work equipmen The load and ca rry method for wheel loaders c onsists of a cycle of scooping -> hauling -> truck, etc.). travel path properly maintained. Always keep the travel path properly maintaine When using the load and carry method, see "P RECAUTIONS FOR USING LOAD AND CA 3-113)".