Komatsu — CHECK BATTERY ELECTROLYTE LEVEL

. MAINTENANCE SERVICE PROCEDURE WHEN IT IS IMPOSSIBLE TO CHECK ELECTROLYTE LEVEL FROM SIDE OF BATTERY battery, or there is no display of the UPPER 4 - 40 If it is impossible to check the electrolyte lev LEVEL line on the s ide of the battery, check a Open the cover of the battery box. There are two b attery boxes: One on eac h side at the rear of the Remove cap (1) at the top of the battery, lo ok through the wa filler port, and c heck the electrolyte surfac e. If the electroly does not reach the sleeve, add distilled w ater so that the le reaches the bott om of the sleeve (UPPER LEVEL line) witho fail.

If distilled water distilled water a Us e the diagram be low for reference, and che ck if the electroly te reaches the bottom o After adding dis tilled water, tighten cap (1 REMARK If distilled water is a dded to above the bottom of the sleeve, use a syringe to lower the level to the bottom of the If d sleeve. Neutralize t he removed fluid with bakin g soda (sodium b icarbonate), then flush i t away with a large a mount of w ater or consult your Komatsu distributor o r battery maker. WHEN IT IS POSSIBLE TO USE INDICATOR TO CHECK ELECTROLYTE LEVEL If it is possible to us e an indicator to check th e electrolyte level, follow the instructions