. MAINTENANCE SERVICE PROCEDURE CHANGE AXLE OIL WARNING REMARK Remove the mud and dirt from around plug (1), then remove the plug. Differential), the brand of ADD OIL (PAGE REPLACE ELEMENT IN AIR CONDITIONER RECIRCULATION AIR FILTER, FRESH AIR FILTER 4 - 54 When chan ging the oil, apply the parking br ake and secure the front and rear frames with the fr ame lock bar. After the e ngine is stopped, the parts and o il are at high temperature, and may cause burns. W ait for the temperature to go down befo re starting the operation. t, so turn it slowly to release the internal pressure, then remove it carefully.
When the p lug is removed, oil may spurt ou t, so turn it slowly to release the internal pressure, t Refill cap acity (front and rear, each): 1 A : Front 1. Set a co ntainer to catch the oil under 2. Remove plug (1), then remove drain 3. After dra ining the oil, clean drain plug 4. Add oil t hrough plug hole (1) at the re REMARK For axles with ASD (Limited-Slip Diff For lubricating o il is different. Use the specifie 5. After ad ding oil, check that the oil is a details, 4-24)".
see "CHECK AXLE OIL LE REMARK For operatio ns where the brake is used fr equently, change the axle oil at shorter interva Remove bot h the recirculation air filter an d fresh air filter in the same way as when cleani ng, and replace them with new parts. For details o f cleaning the recirculation air filter, see "CLEAN ELEMENT IN AIR CONDITI ONER RECIRCULATION FILTER (PA GE 4-43)". f cleaning the fresh air filter, see "CLEAN ELEMENT IN AIR CONDITIONER FRESH AIR FILTER )". For details o (PAGE 4-37