. OPERATION EXPLANATION OF COMPONENTS MONITOR SYSTEM TESTING ACTUATION OF MACHINE MONITOR SYSTEM Directional selector switch (5): Forward or Reverse position 3 - 6 NOTICE Before starting the engine, with the starting switch in the ON position, lamps (1) and (3) (in the diagram o n the right) light up for approx. 3 seconds and the alarm buzzer sounds for a pprox. 3 seconds. amps (2) and (3) go out. engine starts. After 3 seconds all lamps except l Lamps (2) and (3) stay on until the If any lamps do not light up there is probably a failure or a disconnection. Ask your Komatsu distributor to d iagnose the problem. emergency steering device.
Lamp (3) lights up only for the When the starting switch is turned ON, if the directional lever is not at the neutral position, th e central warning lamp lights up and the alarm buzzer sounds in termittently. If this happens, return the directional lever to the n eutral position. The lamp will go out and the buzzer will stop. Directional lever: Neutral po Directional selector actuatio When the starting switch is turned to the ON position with the following condition, all directional (6) will go out.
h (5) is then set to the N position, pilot lamps (6) display the normal the levers and switches in the lever positional pilot lamps If directional selector switc directional lever positional condition "N".