Calculate the piston and cylinder bore clear- ance. Legend 1. Piston Seal 2. Body Assembly 2. Piston and Piston Boot Apply brake oil to the piston outer circumfer- ence. If the clearance exceeds the specified limit, the piston and/or the body assembly must be re- placed along with the repair seal kit. Use a hand vise to install the pistons to the cyl- inder. Apply special grease to the piston. This will prevent cylinder and piston corrosion. Use a new piston boot. Do not confuse the front and rear sides of the boot. Carefully press the insert portion of the boot into the cylinder body groove. Be sure that the insertion depth is uniform. Install the piston boot inner lip to the piston groove.
Handle the piston boot carefully. 1 2 3 N5A0070E Reassembly 1. Piston Seal Be sure to use a new seal ring. Apply rubber grease to the piston seal. The rub- ber grease is included in the seal kit. Install the piston seal to the cylinder bore groove. N5A0434E 1 2 Legend 1. Piston 2. Body Assembly 3. Hand Vise N5A0433E Piston and cylinder bore clearance mm (in) Standard Limit 0.08 — 0.18 (0.003 — 0.007) 0.23 (0.009)