Isuzu — Isuzu N Series Training Manual

N5A0151E 4) Install the brake shoes and the return springs to the wheel cylinders. Keep the brake lining clean. 6. Shoe Holding Spring, Cup and Pin 1) Before installing the holding pin, apply a coat of molybdenum disulfide grease to the holding cup seating faces (1) contacting the brake shoe. 2) After installation of the pins, cups and the springs, make sure the pin (2) seats to the cup (3) properly. After assembly, adjust the lining clearance and air bleeding the brake, referring to “SERVING” in Sec- tion 00 of this section. N5A0152E