Rear Drum Brake Assembly (Drum Inside Diameter 370 mm) 7 4 6 5 3 1 2 3 N5A0464E Legend 1. Cotter pin 5. Wheel cylinder assembly 2. Shoe hold nut 6. Back plate 3. Brake shoe return spring 7. Brake pipe 4. Brake shoe assembly Removal 2. Holder nuts. 3. Shoe return springs using a return spring plier. Return spring plier: 9-8522-0026-0 4. Shoe and lining assemblies. 5. Brake pipes. Raise the axle to clear the tire from the ground. Po- sition jack stands under vehicle. 1. Wheel and tire assembly and brake drum and hub assembly. Block vehicle wheels and apply the parking brake. Notice: The brake pipes to the wheel cylinders must be removed before the wheel cylinders can be removed.
Refer to Section 3E WHEELS AND TIRES. Refer to Section 4C FRONT AXLE and Section 3C FRONT SUSPENSION. 6. Brake hose. 7. Back plate. 8. Wheel cylinders. Refer to Section 4B REAR AXLE.