When the Anti-lock feature is being used, the brake ped- al may rise even as the brakes are being applied. This is also normal. Maintaining a consist force on the pedal will provide the shortest stopping distance. Brake Pedal Travel Vehicles equipped with the Anti-lock Brake System may be stopped by applying normal force to the brake pedal. Although there is no need to push the pedal beyond the point where it stops or holds the vehicle, by applying more force the pedal will continue to travel toward the floor. This extra brake pedal travel is normal. Acronyms and Abbreviations Several acronyms and abbreviations are commonly used throughout this section:
ABS Anti-lock Brake System CKT Circuit DLC Data Link Connector DTC Diagnostic Trouble Code DVM Digital Volt Meter (High Impedance Multimeter) EHCU Electronic Hydraulic Control Unit FL Front Left FR Front Right GEN Generator HU Hydraulic Unit MV Millivolts RL Rear Left RR Rear Right RPS Revolution per Second SW Switch VDC Volts DC VAC Volts AC W/L Warning Light WSS Wheel Speed Sensor