Chart 4 (DTC25/C0225) Exhaust Brake Cut Circuit Abnormality Chart 5 (DTC33/C0233) Motor Drive Circuit Abnormality Chart 6 (DTC 34/C0234) Abnormal Motor Rotation Replace EHCU. Step Action Value(s) YES NO 1 1. Disconnect EHCU connector. 2. Start the engine. 3. Measure voltage between EHCU termi- nals 8 and 1. Is the voltage within the specified value? 12 V vehicle: More than 5 V 24 V vehicle: More than 10 V Go to Step 2 Go to Step 4 2 Measure voltage between EHCU terminals 7 and 1. Is the voltage within the specified value? 12 V vehicle: More than 5 V 24 V vehicle: More than 10 V Go to Step 3 Go to Step 6 3 Short EHCU terminal 8 to 1. Is the voltage at EHCU terminal 7 less than 1.5 V?
— Replace the EHCU. Replace the exhaust brake cut relay. 4 Measure resistance of the exhaust brake cut relay coil. 12 V vehicle: 60 — 120 ohms 24 V vehicle: 210 — 310 ohms Go to Step 5 Replace the exhaust brake cut relay. 5 Measure voltage at coil power side of relay box connector. (key at on position) Is the voltage within the specified value? 12 V vehicle: 10 — 16 V 24 V vehicle: 20 — 32 V Check harness between EHCU terminal 8 and exhaust brake cut relay. Repair as neces- sary. Repair harness and/or power line. 6 Turn the exhaust brake switch on. Does the exhaust brake indicator light turn on? — Repair harness of EHCU terminal 7. Go to exhaust brake diagnosis procedure.
Step Action Value(s) YES NO 1 1. Disconnect EHCU connector. 2. Measure voltage between EHCU termi- nals 24 and 23. Is the voltage within the specified value? 12 V vehicle: 10 — 16 V 24 V vehicle: 20 — 32 V Go to Step 2 Go to Step 3 2 Measure continuity between EHCU terminals 23 and 1. Is there continuity? — Replace the EHCU. Repair the har- ness. 3 Check the ABS fusible link (12 V: 60 A, 24 V: 40 A). Is it okay? — Repair the har- ness. Replace the ABS fusible link (12 V: 60 A, 24 V: 40 A)