Isuzu — Isuzu N Series Training Manual

Front Speed Sensor Components N5A1051E Legend 1. Speed Sensor Connector 4. Sensor Fixing Bolt 2. Sensor Cable Fixing Bolt 5. Speed Sensor 3. Sensor Cable Fixing Bolt (Front Disc Brake model) Sensor Cable Fixing Nut (Front Drum Brake model) 6. Front Removal Installation 1. Remove speed sensor connector. 2. Remove sensor cable fixing bolts and/or nut. 3. Remove the speed sensor fixing bolt. 4. Remove speed sensor. 1. Install speed sensor and take care not to hit the speed sensor pole piece during installation. 2. Install speed sensor fixing bolt and tighten the fix- ing bolt to the specified torque. Inspection and Repair Tighten: Bolt to 22 N m (2.2 kg m/16 lb ft) 1.

Check the speed sensor pole piece for presence of foreign materials; remove any dirt, etc. 2. Check the pole piece for damage; replace speed sensor if necessary. 3. Check the speed sensor cable for short or open cir- cuit, and replace with a new one if necessary. To check for cable short or open, bend or stretch the cable while checking for continuity. 3. Install speed sensor cable fixing bolts and tighten the fixing bolt to the specified torque. Tighten: Bolts (2) to 22 N m (2.2 kg m/16 lb ft) Bolts (3) to 45 N m (4.6 kg m/33 lb ft) Nut (3) to 15 N m (1.5 kg m/11 lb ft) Notice: Confirm that a white or yellow line marked on the cable is not twisted when connecting the speed sensor cable.