List of Diagnostic Trouble Code Diagnosis with Blinking Pattern If the ABS/ASR warning lamp blinking pattern is found to be faulty with the ignition switch ON, or when the warn- ing lamp comes on during the test run, perform the diag- nosis according to the chart shown below depending on the blinking pattern.
DTC Description Check flow Flash out code (warning lamp blinking pattern) Tech 2 code 12 C0212 Normal — 13 C0213 Model type identification fault due to wrong assembly of control unit B-2 14 C0214 EHCU fault B-3 15 C0215 ECU power supply fault B-4 16 C0216 CAN Communication fault B-5 26 C0226 ECM Communication fault B-6 33 C0233 Motor drive circuit fault B-7 34 C0234 Motor rotation fault B-8 35 C0235 ASR communication fault (ASR only) ASR continuous operation B-9 41 C0241 Fail-safe relay fault B-10 43 C0243 Solenoid drive circuit fault B-11 45 C0245 Solenoid monitor circuit fault B-12 51 C0251 Speed sensor open/short circuit; FL B-13 52 C0252 Speed sensor open/short circuit; FR B-14 53 C0253 Speed sensor open/short circuit; RL B-15 54 C0254 Speed sensor open/short circuit; RR B-16 61 C0261 Speed sensor signal fault/wrong tire size; FL B-17 62 C0262 Speed sensor signal fault/wrong tire size; FR B-18 63 C0263 Speed sensor signal fault/wrong tire size; RL B-19 64 C0264 Speed sensor signal fault/wrong tire size; RR B-20