Isuzu — Isuzu N Series Training Manual

No. Lamp condition Warning lamp illumination pattern Diagnostic flow 3 Warning lamp remains on. DTC is stored. Display the DTC and perform the diagnosis for each code according to the diagnos- tic flow. If DTC is not stored, warning lamp illumination circuit or meter may be faulty. Check the meter itself or harness between the meter and EHCU con- nector terminal 6. N5A2031E 4 Warning lamp comes on when driving. DTC is stored. Display the DTC and perform the diagnosis for each code according to the diagnos- tic flow. N5A2032E 5 Warning lamp repeats blinking after turning the starter switch ON, and then turns on when driv- ing the vehicle. Self-diagnosis circuit is faulty.

Go to check flow B-1-2. N5A2033E