Isuzu — Isuzu N Series Training Manual

Symptom: [The ABS Operates Frequently but Brake Force is Insufficient, or the ASR Oper- ates Frequently.] (Check Flow A-1) Check flow A-1 Step Action Value YES NO 1 Check the tire. Is the tire specification correct? Is abnormal wear found in the outer surface? — Go to Step2 Replace with the specified tire with- out wear.Go to Step7 2 Is the brake balance between front and rear wheels correct? — Go to Step3 Repair the brake components.Go to Step7 3 Are the axle-related parts correctly assem- bled? — Go to Step4 Repair the parts.Go to Step7 4 Is the speed sensor installation normal? — Go to Step5 Repair the wheel speed sensor.Go to Step7 5 Is the speed sensor/sensor rotor damaged?

Or iron powder attached? — Go to Step6 Replace the sen- sor or sensor rotor. Go to Step7 6 Are all the wheel speed sensor outputs nor- mal? — Replace the con- trol unit.Go to Step7 Replace the wheel speed sen- sor, or repair the circuit. Go to Step7 7 Install all the components, and check that those are installed properly. Is this step completed? — Repeat “Diagnos- tic basic flow”. Go to Step7