Isuzu — Isuzu N Series Training Manual

Symptom: [Wheels are Locked During Brake Operation.] (Check Flow A-3, TA-3) Check flow A-3, TA-3 Step Action Value YES NO 1 Does the ABS operate? — Go to Step2 Go to Step4 2 Is the vehicle speed 10km/h (6 mph) or less? — Go to Step3 Normal 3 Are the wheel speed sensor outputs normal? (Refer to the check flow C-1 or TC-1) — Go to Step4 Replace the sen- sor or repair the circuit. Go to Step5 4 Is the EHCU grounded properly? — Replace the EHCU.Go to Step5 Repair.Go to Step5 5 Assemble all the components, and check that those are installed properly. Is this step completed? — Repeat “Diagnos- tic basic flow”. Go to Step5