Isuzu — Isuzu N Series Training Manual

Engine Model 4HF1 4HF1-2 Item Injection nozzle type Injection nozzle type Pressure MPa (kg / cm2 / psi) Pressure adjustment Main fuel filter type Lubricating system Lubrication method Specified engine oil (API grade) Oil pressure kPa (kg /cm2 / psi) — rpm Oil pump type Oil filter type Oil capacity lit (US / UK gal) Oil cooler type Cooling system Radiator type Coolant capacity lit (US / UK gal) Water pump type Pump to crankshaft speed to : 1 ratio Delivery volume lit (US / UK gal)/min Pump bearing type Thermostat type Valve initial opening tem- °C (°F) perature Valve lift mm (in) Air cleaner type Battery type Volt-amp.hr.

Generator Type Voltage V Drive and rotation Ground polarity Maximum output A Maximum speed rpm Hole type (with 5 orifices) 18.1 (185 / 2,631) Shim adjusted Disposal spin-on cartridge and remote mounted water separator Full flow pressure circulation CD or above 147 (1.5 / 21) — 700 (SAE 10W-30 API CD grade engine oil at 80°C (176°F)) Gear type Spin-on cartridge 10.5 (2.77 / 2.31) Water cooled Corrugated fin with reserve tank 12 (3.17 / 2.64) Centrifugal impeller, V-belt drive 1.16 (175 / 151) 200 (52.8 / 44.0) (Pump speed at 3,300 rpm Water temperature at 82°C (180°F)) Double row shaft Wax pellet With jiggle valve: 85±1.5 (182 — 188) Without jiggle valve: 82±1.5 (177 — 182) With jiggle valve:

8 (0.3) or more at 100°C (212°F) Without jiggle valve: 8 (0.3) or more at 95°C (203°F) Dry paper element 55D23R / 12 — 60 : 2 pcs AC brush with IC regulator and vacuum pump 24 V-belt, clockwise viewed from the drive pulley Negative 50 at 5,000 rpm (For Indone- sian) 60 at 5,000 rpm 80 at 5,000 rpm 7,500 — 10,000