Isuzu — Isuzu N Series Training Manual

Engine Model 4HG1 4HG1-T Item Regulator Type Regulating voltage V Vacuum pump -66.7kPa (-500 mmHg / -9.67 psi) build- up time Maximum vacuum Starter motor Type Model Rated voltage V Rated output kW Load characteristics Terminal voltage V Load current A Torque N⋅m (kg⋅m / lb⋅ft) Preheating system Exhaust system Pipe outside diameter × thickness Front pipe mm (in) Middle pipe mm (in) Rear pipe mm (in) Silencer type Inside diameter mm (in) IC 28 — 29 14.4±0.3 28 — 29 13 seconds or less at 1,000 rpm 4 seconds or less at 5,000 rpm -90.7 kPa (-680 mmHg / -13.1 psi) or more at 5,000 rpm Magnetic solenoid-controlled S25-168 R3.0 S25-168 24 12 24 4 3 4 18.55 14 18.55 250 890 (MAX) 250 14.22 (1.45 / 10.49) 29.4 (2.99 / 14.22 (1.45 / at 1,500 rpm or more 21.63) 10.49) at 860 rpm or at 1,500 rpm more or more Quick-On-Start System II 60.5 × 2.0 (2.38 × 0.079) 60.5 × 2.0 (2.38 × 0.079) 60.5 × 1.6 (2.38 × 0.063) Circular section-shell construction of triple skin and end plates, internal construction of baffles and perforated tubes Approximately 200 (7.87)