Engine Model 4HE1-TC (4HE1-XS, XN) 98EPA 4HE1-TC (4HE1-XS) SPEC. EURO3 Item Fuel system Injection pump type Plunger outside diameter mm (in) Plunger lift mm (in) Governor type Automatic timer type Fuel feed pump type Injection nozzle opening Injection nozzle type Pressure MPa (kg / cm2 / psi) Pressure adjustment Main fuel filter type Lubricating system Lubrication method Specified engine oil (API grade) Oil pressure kPa (kg /cm2 / psi) — rpm Oil pump type Oil filter type Oil capacity lit (US / UK gal) Oil cooler type Cooling system Radiator type Coolant capacity lit (US / UK gal) Water pump type Pump to crankshaft speed to :
1 ratio Delivery volume lit (US / UK gal)/min Pump bearing type Thermostat type Valve initial opening tem- °C (°F) perature Valve lift mm (in) Bosch in-line MI-TICS Different injection fuel quantity between 98EPA and EURO3, or XS and XN 11 (0.433) 12 (0.472) RLD-M mechanical (Variable speed) Electronic control Piston Hole type (with 6 × 0.22φ orifices) (with 6 × 0.21φ orifices) 21.6 (220 / 3,128) Shim adjusted Disposal spin-on cartridge and remote mounted water separator Full flow pressure circulation CD or above 147 (1.5 / 21) — 700 (SAE 10W-30 API CD grade engine oil at 80°C (176°F)) Gear type Spin-on cartridge 13 (3.43 / 2.86) Water cooled Corrugated fin with reserve tank 11 (3.70 / 3.08) Centrifugal impeller, V-belt drive 1.19 200 (52.8 / 44.0) (Pump speed at 3,300 rpm Water temperature at 82°C (180°F)) Double row shaft Wax pellet With jiggle valve:
85 ± 1.5 (182 — 188) Without jiggle valve Primary: 82 ± 2 (176 — 183) Secondary: 85 ± 2 (181 — 189) With jiggle valve: 8 (0.3) or more at 100°C (212°F) Without jiggle valve: 8 (0.3) or more at 95°C (203°F)