Isuzu — Isuzu N Series Training Manual

SERVICE STANDARD Engine Cylinder Head Cylinder Head Gasket Selection Remarks: The grade mark of the cylinder head gasket is shown by semicircular notches on the left side of the front portion of the gasket. 4HF1/4HF1-2/4HG1-T Cylinder Head Gasket Selection N6A1401E Item Service Standard Service Limit Compression Pressure KPa (kg / cm2 / psi) / rpm 3040 (31 / 441) or more Variance in pressure between the cylin- ders: less than 294 (3 / 43) / 200 2,157 (22 / 312) Item Service Standard Service Limit Inlet and Exhaust Valve Seat Depression mm (in) N6A1400E 0.7 — 1.2 (0.028 — 0.047) Measurement should be taken by using a new valve.

2.5 (0.098) Cylinder Head Lower Face Warpage mm (in) 0.05 (0.002) or less Do not regrind the cylinder head lower face. 0.2 (0.008) Manifold Fitting Face Warpage mm (in) 0.05 (0.002) or less 0.2 (0.008) Water Leak Test kPa (kg / cm2 / psi) 490 (5 / 71) — 3 minutes Repair or replace those having water leak.