Cylinder Body Item Service Standard Service Limit Valve Guide Upper End Height mm (in) N6A1410E 14.1±0.2 (0.555±0.008) Valve Stem Seal Lip Wear mm (in) 8.3 — 8.7 (0.3268 — 0.3425) 8.8 (0.346) Valve Spring Tension N (kg / lb) 414 — 477 (42.2 — 48.6 / 93 — 107) Set length 47.0 mm (1.85 in) 40.9 (98 / 401) Valve Spring Free Height mm (in) Nominal size 62.5 (2.46) 59.4 (2.34) Valve Spring Squareness mm (in) N6A1411E 1.0 (0.04) Valve Clearance (At cold) mm (in) 0.4 (0.016) Valve Stem Cap Wear mm (in) N6A1412E 0.5 (0.02) Replace it when worn or deformed excessively. Item Service Standard Service Limit Cylinder Liner Bore Wear mm (in) N6A1413E 1. 20 mm (0.79 in) 2. 90 mm (3.54 in) 3.
160 mm (6.30 in) 4HF1: 112.021 — 112.050 4HF12: (4.4103 — 4.4114) 4HG1: 115.021 — 115.050 4HG1-T: (4.5284 — 4.5295) 4HE1-TC: 110.041 — 110.080 (4.3323 — 4.3338) 112.20 (4.417) 115.20 (4.535) 115.20 (4.535) Cylinder Liner Projection mm (in) 0.10 — 0.14 (0.0039 — 0.0055) The difference in the cylinder liner pro- jection height between any two adja- cent cylinders must not exceed 0.03 (0.0012) There must be a projection on the cylinder liner. Cylinder Body Upper Face Warpage mm (in) 0.05 (0.002) or less Do not regrind the cylinder body upper face. 0.02 (0.008)