Isuzu — Isuzu N Series Training Manual

N6A0009E N6A0011E Carbon and Dust Fouled Element 4. Dry the element in a well ventilated area. An electric fan will hasten drying. 1. Prepare a cleaning solution of Isuzu Genuine Ele- ment Cleaner (Donaldson D1400) diluted with wa- ter. 2. Immerse the element in the solution for twenty min- utes. Caution: Do not use compressed air or an open flame to dry the element quickly. Damage to the element will result. It will usually take two or three days for the element to dry completely. Therefore, it is a good idea to have a spare on hand to use in the interim. N6A0010E 3. Remove the element from the solution and rinse it well with running water.

Water pressure must not exceed 274 kPa (2.8 kg/ cm 2 / 39.8 psi). N6A0012E Lubricating System Main Oil Filter (Disposable Spin-On Cartridge Element) Replacement Procedure 1. Loosen the used oil filter by turning it counterclock- wise with the filter wrench. Filter Wrench: 1-85221-097-0