Isuzu — Isuzu N Series Training Manual

N6A0187E N6A0186E Legend 1. Oil seal 2. Slinger 3. Felt 19. Crankshaft Front Slinger Use the slinger puller to pull out the slinger. Slinger Puller: 5-8840-2360-0 Notice: If the oil seal has been removed, both the oil seal and slinger must be replaced as a set. N6A6504E Legend 1. Washer 2. Pilot bearing 21. Crankshaft Rear Oil Seal Caution: Be careful not to damage the crankshaft oil seal contact surface during the removal procedure. N6A0188E 20. Flywheel Assembly 1) Use the crankshaft stopper to prevent the crankshaft from turning Crankshaft Stopper: 5-8840-2230-0 2) Loosen the flywheel bolts in numerical order a little at a time as shown in the illustration.

3) Remove the flywheel stopper and the flywheel assembly.