Isuzu — Isuzu N Series Training Manual

23. Oil Pan 24. Spacer Rubber Above works refer to “CYLINDER BLOCK” section in this manual. 25. Crankshaft Rear Slinger Press in the slinger using oil seal setting tool kit. 1) Insert the slinger (1) into the end of the adapter (2) and install the adapter on the crankshaft. N6A0237E Notice: Be sure to replace the slinger and oil seal as a set. Oil Seal Setting Tool Kit: 5-8840-2431-0 N6A0235E 2) Cover the sleeve (3) and tighten the bolt until the sleeve comes to contact the adapter stop- per (4). N6A0236E 3) Make sure of measurements specified in the il- lustration as well as of slinger deflection. (A): 17.3 ± 0.3 mm (0.681 ± 0.012 in) (B):

10.8 ± 0.1 mm (0.425 ± 0.004 in) N6A0238E Rear slinger and oil seal setting tools Part Name Stamp Slinger Oil Seal Adapter RR ❍ ❍ Sleeve RR ❍ ❍ Oil seal adapter ring RR ❍ Center bolt — ❍ ❍ Adapter bolt — ❍ ❍ Adapter bolt collar RR ❍ ❍