Isuzu — Isuzu N Series Training Manual

Above works refer to “CYLINDER HEAD” section in this manual. Legend 1. Oil seal 2. Adapter 3. Ring 4. Adapter bolt 5. Sleeve 6. Washer (5 mm (0.20 in)) 7. Center bolt 30. Crankshaft Damper Pulley 1) Apply a coat of engine oil to the threads of the bolts. 2) Align the damper pulley with the crankshaft knock pin and tighten the bolts to the specified torque in numerical order. Tighten: Damper pulley bolt to 200 N m (20.4 kg m / 147 lb ft) 31. Generator Bracket 32. Fan Belt Adjust Plate 33. Injection Pump Assembly 34. Engine Foot 35. Generator 36. Fan Belt 37. Fan Belt Adjustment 38. Vacuum Pump Rubber Hose 39. Vacuum Pump Oil Pipe 40. Oil Filter Assembly 41. Oil Pipe 42.

Engine Control Lever Assembly 43. Engine Control Wire 44. Driven Plate 45. Clutch Pressure Plate Assembly 46. Cylinder Head Gasket Above works refer to “CYLINDER BLOCK” section in this manual. 47. Cylinder Head Assembly N6A0250E