Isuzu — Isuzu N Series Training Manual

CYLINDER HEAD COVER Component N6A0381E Legend 1. Nozzle cover 3. Cylinder head cover gasket 2. Cylinder head cover 4. Rubber plug Removal 1) Apply a 3 — 4 mm (0.12 — 0.16 in) bead of the recommended liquid gasket (Three Bond 1207B) or its equivalent to the cylinder head front and rear plug arch. 2) Install the rubber plugs to the cylinder head up- per faces. 3) Apply a 3 — 4 mm (0.12 — 0.16 in) bead of the recommended liquid gasket (Three Bond 1207B) or its equivalent to the rubber plugs and cylinder head upper faces. Refer to arrows in the illustration. Preparation Disconnect battery ground cable. Tilt the cab. 1. Nozzle Cover 2. Cylinder Head Cover 3. Cylinder Head Cover Gasket 4.

Rubber Plug Installation 1. Rubber Plug