Isuzu — Isuzu N Series Training Manual

N6A0389E N6A0391E Legend 1. Engine harness Legend 1. Inlet cover 2. Inlet case 3. Gasket 9. Oil Level Guide Tube Remove the guide tube fixing bolt and pull out the guide tube. Installation 1. Inlet Case 1) Apply 2 — 3 mm (0.08 — 0.12 in) bead of the recommended liquid gasket (Three Bond 1207C) or its equivalent on the groove (1) of the inlet case fitting surfaces shown in the illustra- tion. Clean the inlet case fitting surface of the cylin- der head. 10. Inlet Cover 11. Inlet Case Remove the inlet case while removing the liquid gasket. N6A0390E N6A0392E 2) Install the inlet case to the cylinder head. Install the inlet case within 7 minutes after ap- plication of liquid gasket.

3) Tighten the inlet case to the specified torque.