Installation 1. Exhaust Gasket Insert the gasket into the stud provided to the cyl- inder head (with the projection (1) of the gasket on this side). N6A0414E 3. Heat Protector Tighten: Heat protector bolt to 10 N m (1.0 kg m/7 lb ft) N6A0412E 2. Exhaust Manifold 1) Install exhaust manifold gaskets (1), exhaust manifold (2), distance pieces (3), dish washers (4) and nuts (5) to the stud bolts shown in the illustration. N6A0415E 4. Front Exhaust Pipe Tighten: Front exhaust pipe to Exhaust manifold side: 67 N m (6.8 kg m/49 lb ft) Exhaust brake side: 17 N m (1.7 kg m/12 lb ft) 5. Air Conditioning (A/C) Compressor Bracket (If equipped with A/C) Tighten fixing bolts to the specified torque.
N6A0413E 2) Tighten the nuts to the specified torque in the numerical order shown in the illustration. Tighten: A/C compressor bracket bolt to 48 N m (4.9 kg m/35 lb ft) Tighten: Exhaust manifold nut to 34 N m (3.5 kg m/25 lb ft)