Use the dial gauge to measure the piston head pro- jection. Take measurements at two location for each cylinder. 4HF1/4HF1-2/4HG1-T Cylinder Head Gasket Selection The measurement points of the piston head and the reference point of the cylinder body are shown in the illustration. N6A1396E 4HE1-TC Cylinder Head Gasket Selection N6A0353E Measurement points: Points G1 and G2 of the piston head Reference point: Point R on the top face of the cylinder body N6A1397E N6A1628E Notice: Note that there are three types of a cylinder head gasket available as below, according to the piston projection. For each cylinder, calculate the average value (Ti) of the piston projection.
Find the maximum value (Ti max) of the average of each cylinder. Based on the Timax obtained, select a gasket of the appropriate grade.