Isuzu — Isuzu N Series Training Manual

Connect thermometer unit, thermo switch, tachom- eter sensor and glow plug harness connector and fasten the engine harness with clips. N6A0395E 3. Fuel Injection Pipe Assembly Above works refer to “INJECTION PUMP ASSEM- BLY” section in this manual. 4. Positive Crankcase Ventilation (PCV) Hose 5. Water Bypass Hose 6. Fuel Filter & Bracket N6A0399E Tighten: Fuel filter bracket to 34 N m (3.5 kg m/25 lb ft) Legend 1. Fuel pipe joint bolt 2. Fuel pipe joint bolt 3. Clip 7. Fuel Pipe Do not apply excessive force to the fuel pipe. Tighten: Fuel pipe joint bolt (1) to 41 N m (4.2 kg m/30 lb ft) 8. Leak Off Pipe Tighten: Leak-off pipe joint bolt to 13 N m (1.3 kg m/113 lb in) Tighten:

Fuel pipe joint bolt (2) to 23 N m (2.3 kg m/17 lb ft) Tighten: Clip screw to 4 N m (0.4 kg m/35 lb in) N6A0400E 9. Nozzle Cover 10. Vacuum Hose