Isuzu — Isuzu N Series Training Manual

N6A0415E N6A0392E 11. Air Conditioning (A/C) Compressor Bracket (If equipped with A/C) Tighten fixing bolts to the specified torque. 2) Install the inlet case to the cylinder head. Install the inlet case within 7 minutes after ap- plication of liquid gasket. Tighten: A/C compressor bracket bolt to 48 N m (4.9 kg m/35 lb ft) Attach harness clips ((1), (6) and (7)) and tight- en the inlet cover bolts and nuts to the specified torque in the numerical order shown in the illus- tration. N6A0416E N6A1500E 12.

Inlet Cover/Inlet Case 1) Apply 2 — 3 mm (0.08 — 0.12 in) bead of the recommended liquid gasket (Three Bond 1207C) or its equivalent on the groove (1) of the inlet case fitting surfaces shown in the illustra- tion. marks are located on nut positions. Tighten: Inlet cover bolt and nut to 13 N m (1.3 kg m/9 lb ft) Clean the inlet case fitting surface of the cylin- der head.