Isuzu — Isuzu N Series Training Manual

57. Camshaft Bearing Lower 58. Camshaft Assembly 59. Camshaft Bearing Upper 60. Camshaft Bearing Cap 61. Valve Cap Above works refer to “CAMSHAFT ASSEMBLY” section in this manual. 62. Rocker Arm Shaft Assembly Above works refer to “ROCKER ARM SHAFT AS- SEMBLY” section in this manual. 63. Head Cover Gasket Above works refer to “CYLINDER HEAD” section in this manual. 64. Cylinder Head Cover 1) Install the cylinder head cover. 2) Tighten the cylinder head cover nuts and bolts to the specified torque in the numerical order shown in the illustration. N6A0351E Legend 1. Clutch pilot aligner 2. Clutch pressure plate assembly 3. Driven plate Tighten:

Cylinder head cover nut and bolt to 18 N m (1.8 kg m/13 lb ft) 54. Clutch Pressure Plate Assembly 1) Align the clutch pressure plate with the flywheel knock pin. 2) Tighten the pressure plate bolts to the specified torque in numerical order. Tighten: Clutch pressure plate bolt to 40 N m (4.1 kg m/30 lb ft) N6A0352E N6A0383E Legend A. Knock pin 55. Cylinder Head Gasket 56. Cylinder Head Assembly Above works refer to “CYLINDER HEAD” section in this manual.