N6A0611E N6A0778E Legend 1. Stud bolt 2. Rubber 3. Washer 4. Flange nut 5. Flame side bracket 6. Radiator side bracket 3) Operate the priming pump to bleed the air from the injection pump. 4) Retighten the bleeder valve. 5) Operate the priming pump. Check for fuel leakage from around the injec- tion pump and the fuel filter. 6) Lock the priming pump cap to the injection pump. For 4HE1-TC 3. Fan Guide 4. Radiator Lower Hose 5. Coolant Reserve Tank Hose/Bypass Hose 6. Radiator Upper Hose Engine Left Side 1. Fuel Feed Hose 2. Fuel Return Hose Air Bleeding 1) Loosen the priming pump cap (2) at the side of the injection pump. 2) Loosen the bleeder valve (1) (4HF1) at the top of the fuel filter.
N6A0779E 3. Accelerator Control Cable 1) Check to see if the idling control knob is turned to the extreme left. 2) Attach the end tip of the cable to the engine control lever. 3) Pull the outer cable toward the front of the vehi- cle, and provide the engine control wire and the inner cable with an appropriate play before fas- tening the clamp with a nut.