2. Fan Guide 3. Fan Bearing Unit 1. Rotate the fan center while pushing it toward the radius, and check to see if there is any excessive play or noise. 2. When there is any excessive play or noise found, replace it as a water pump assembly. N6A0798E 4. Fan Belt 5. Water Pump Pulley 6. Water Pump Assembly N6A0800E Inspection Make the necessary adjustments, repairs, and part re- placements if excessive wear or damage is discovered during inspection. Installation 1. Water Pump Assembly 1) Apply 3 — 4 mm (0.12 — 0.16 in) bead of the recommended liquid gasket (Three Bond 1207C) or its equivalent on the water pump fit- ting surface. 2) Install the water pump to the front retainer.
Water Pump Assembly 1. Check the pump body for crack and damage. 2. Check the impeller for crack and corrosion. 3. Check the seal unit leakage. 4. If there is any abnormal condition, replace the wa- ter pump as an assembly. Tighten: Water pump bolt to 24 N m (2.4 kg m / 17 lb ft) Install the water pump within 7 minutes after appli- cation of liquid gasket. For the dislocation of liquid gasket, refer to the il- lustration. N6A0799E N6A1625E