Isuzu — Isuzu N Series Training Manual

Legend 1. Belt deflection Tension Adjustment (Refer to the illustration on the previous page.) 1. Generator & Water Pump Pulley Drive Belt 1) Loosen the Air Conditioning (A/C) drive belt tension pulley adjust bolt and lock nut (D). Then free the A/C drive belt. 2) Loosen the adjust plate lock nut (B), the fixing bolt (A), and the fixing bolts (C) on the lower side of the generator. 3) Rotate the adjust bolt to adjust the belt. 4) After adjustment, tighten each section to the specified torque. Tighten: Bolt and nut to (A): 46 N m (4.7 kg m / 34 lb ft) (B): 24 N m (2.4 kg m / 17 lb ft) (C): 40 N m (4.1 kg m /30 lb ft) 5) Adjust the A/C drive belt tension. 2.

A/C Compressor Drive Belt 1) Loosen the tension pulley lock nut (D), and ro- tate the adjust bolt to adjust the belt. When finishing the fan drive belt adjustment, then adjust the A/C drive belt. After adjustment, tighten the lock nut (D) to the specified torque. Tighten: Lock nut (D) to 27 N m (2.8 kg m / 20 lb ft).