Isuzu — Isuzu N Series Training Manual

N6A1036E N6A0037E Legend 1. Sliding piece 2. Adjust bolt 3. Adjust plate 4. Nut 5. Generator Check the drive belt for cranking and other dam- age. Fan Belt Adjustment Fan belt tension is adjusted by moving the generator. Notice: Before tightening the generator, tighten in advance the fan belt temporarily after its adjustment. 2. Generator Insert the lower fixing bolt from the rear side as shown in the illustration, and tighten it with a nut on the front side. N6A0038E Tighten: Bolt to (1): 40 N m (4.1 kg m / 30 lb ft) (2): 24 N m (2.4 kg m / 17 lb ft) (3): 46 N m (4.7 kg m / 34 lb ft) 4. ACG Harness 5. Vacuum Hose 6. Vacuum Pump Rubber Hose 7. Vacuum Pump Oil Pipe N6A0344E 3.

Fan Belt Check the drive belt tension. Depress the drive belt mid-portion with a 98 N (10 kg / 22 lb) force. Drive Belt Deflection mm (in) New belt 8 — 12 (0.31 — 0.47) Reuse belt 10 — 14 (0.39 — 0.55)