VSS (Variable Swirl System) The Variable Swirl System (VSS) is designed to adjust the intensity of swirl by allowing or not allowing air to flow through a sub-port (or bypass) the runs in parallel with the intake port for each cylinder. The swirl intensifies when there is no air flow through the sub-port, and vice versa. The air flow is controlled by the on-off valve at the inlet to the sub-port and the valve in turn is turned on and off by computer signals which are dependent on engine speed, load and coolant temperature, Basically, the air is cut off at low speeds to maintain high swirl and is allowed to flow at high speeds to maintain low swirl.
Variable Swirl System (Equipped with Exhaust gas recirculation (EGR) and VSS) N6A1261E Legend 1. Cylinder head 7. Vacuum 2. VSS case 8. VSV; VSS 3. Inlet port 9. Actuator 4. Sub-port 10. Thermo sensor 5. Control valve 11. Engine speed sensor 6. Inlet manifold 12. Rack sensor