03 - Attachments, Couplings and Load Handling 00 - Attachments 00 - General Health and Safety Attachments Use only the JCB approved attachments that are specified for your machine. Operating with non- specified attachments can overload the machine, causing possible damage and machine instability which could result in injury to yourself or others. The use of non-approved attachments could invalidate your warranty and cause damage to both machine and attachments. Attachments If you have an attachment which is not covered in the Operator's Manual do not install it, use it or remove it until you have obtained, read and understood the pertinent information.
Install attachments only on the machines for which they were designed. WARNING! Load and unload on firm, level ground. Always be alert for possible hazards. Take special care when turning or reversing. DANGER! Before lowering the attachments to the ground, make sure that the machine and the area around it are clear of other people. Anyone on or close to the machine could fall and be crushed by the attachments, or get caught in the linkages. DANGER! Using the forks alone as a working platform is hazardous; you can fall off and be killed or injured. Never use the forks as a working platform. 03 - 4 9813/6050-2 03 - 4