JCB — 10 Excavator End Quickhitch

03 - Attachments, Couplings and Load Handling 10 - Excavator End Quickhitch 00 - General Health and Safety Check (Condition) WARNING Do not lean out of the cab to operate the quickhitch levers. If the controls are moved accidentally you could be killed or injured. 1. Check the condition of the quickhitch for damaged or missing parts. WARNING Always install the quickhitch latch hook locking pin (mechanical only). Failure to install the pin will result in possible failure of the latching mechanism. Such a failure could result in the sudden release of an attachment from the machine and you or others could be killed or seriously injured. 2.

Remove any debris from the latch hook locking mechanism. 3. When you clean the quickhitch with HP (High Pressure) water, make sure you grease the latch hook pivot pin after cleaning. WARNING The attachment will move when released. Stand clear and to one side when releasing the attachment. 4. Grease the latch hook pivot pin at the specified duration Duration: 7 d WARNING Attachments that are installed with the use of loader or excavator quickhitches must not be used to transport or lift persons if the machine is not designed and equipped to do so. CAUTION When the quickhitch is attached to the machine, allowance must be made for the weight of the quickhitch on the rated operating load.

The mass of the Quickhitch is stamped on the data plate. 03 - 16 9813/6050-2 03 - 16